Sale!
Defiance Machine Tenacity Action
Defiance Machine Tenacity Action
Defiance Machine Tenacity Action

Defiance Machine Tenacity Action RIGHT PORT LONG .550 MAGNUM BOLT FACE 700 Bolt Shroud .430 .0710-FIRING PIN LONG

Original price was: $1,595.00.Current price is: $1,295.00.

Out of stock

Email when stock is available

SKU: TA-550 Categories: , , , ,

Description

TENACITY ACTIONS

Defiance’s superior quality in a versatile, ready-for-anything bolt action

As Defiance has grown it has gained more equipment and more abilities.  The already popular Tenacity has been updated with these advances to now come standard with an integral recoil lug.  With the integral recoil lug and precision machined bolt the Tenacity guarantees a headspace tolerance of +/- .001″ action to action.

Since some shooters and hunters don’t always need custom options, Defiance has introduced a well-designed, precision rifle action that’s ready to work.  The Tenacity is machined from the same steels and to the same tolerances as the Rebel and Deviant. Limited options (see below), but a versatile design that delivers either on the range or deep in the wilderness.

  • Receiver made of pre-hardened aircraft-certified 416 stainless steel with integral recoil lug.
  • Bolt made of pre-hardened aircraft-certified 4340 chrome moly with recessed bolt lugs, utilizing a mini-16 extractor and plunger ejector.
  • Receiver barrel threads are 1.0625” X 16 T.P.I. (Rem. 700 thread dia. and pitch)
  • Integral recoil lug included
  • Actions available in:
    • Short (Rem. Model 7)
    • Medium (Rem. SA)
    • XM (3.200″ max cartridge length) requires XM BDL KIT
    • Long (Rem. LA)
  • Medium length actions available in .390”, .480”, and .550” bolt face
  • XM length actions available in .480” and .550” bolt face
  • Long length actions available in .480”, .550”, and .595” bolt face
  • Available in right & left hand
  • Optional stainless steel, 20 MOA picatinny scope mount ($90), attached with 8-40 screws, and 1/8” hardened dowel pins, or Talley Manufacturing one-piece Lightweight Alloy Scope Mounts ($61.95)
  • BDL mag cut works hinged floor plates and single stack AICS magazines
  • DBM mag cut works with detachable magazines either AICS/AW
  • 2.0# (32 oz.) approximate weight with scope mount
  • Close tolerance preserved: All material pre-hardened prior to machining to prevent changing tolerances during heat treat.
  • Receiver machined from one piece of pre-hardened 416SS.
  • Wire EDM-cut, full-length lug ways result in smooth bolt operation.
  • Bolt machined from one piece of pre-hardened 4340 chrome moly, and threaded for interchangeable knobs.
  • Primary extraction design significantly increases initial extraction and ensures smooth bolt cycling.

Tenacity Action Build Sheet 
Bolt Side: Right Bolt
Port Side: RIGHT PORT
Receiver Length: LONG
Receiver Diameter: 1.350(Rebel)
Bolt Diameter: .697 bolt
Bore Diameter: 0.700 Rec.
Primary Extraction: Performance
Thread Depth: 1.403 THREAD DEPTH 16 TPI
Loading Port Type: Tenacity Port
Rear Bridge: FULL ROUND
Facet: No Facet
Bedding Type: Bolt In
Magazine Type (2): Wyatt 3006 / 300 WM
Trigger Type: PINNED TRIGGER
Safety: Remington Style Safety
Ejector: PLUNGER EJECTOR
Manufacturer: Defiance – Laser (L)
Tang Hole: THROUGH TANG HOLE
Tang: Tenacity Tang
Bolt Stop: Defiance Wyatt Rotated
Recoil Lug: Integral Recoil Lug
Bolt Nose: REMINGTON “RECESSED” BOLT NOSE
Extractor Type: MINI 16 EXTRACTOR
Bolt Flutes: Tenacity Flutes RH
Bolt Face: .550(MAGNUM BOLT FACE)
Rear Scope Spacing: 0.605
Scope Mount: Mil Standard 1913 20 MOA
Center Guard for Single Shot: NONE
Port Length: DEFIANCE PORT LENGTH
Receiver Material: Stainless Steel Receiver
Number of Scope Screws: 4 Scope Screws
Bolt Handle: 5 Rotation, 0 Sweep, .430″ Diameter
Bolt Shroud Design: 700 Jense Shroud SS 1/2-24
Bolt Knob: Ruckus, Tactical, .430
Firing Pin: .0710-FIRING PIN LONG
Lugway: 700 Tenacity
anTi Cuts: No

Note: This item will only ship to a Federal Firearms License Dealer (FFL)

We do a lot of business with H&M Nitride so these could also be sent to them for black nitride coating for a $75 fee. 

PRODUCT SKU: TA-550

Related products