BKF M4 MK1 Breek Warhammer & 2 Stage Trigger Performance Kit – 1/2×28

Description

This Combat Control Kit is made from billet 4140 heat treated alloy steel with a beautiful nitride finish. The textured surface gives it an enhanced gripping ability. The ambidextrous safety selector can be used as a 90° or 45° throw lever. The mag release is deeply threaded to allow for normal height installation, or thread it halfway to get an extended mag release! The oversized bolt catch makes those mag reloads much easier and quicker. A must have for every build! The BKF M4 Mod-1 Breek Performance Kit is the perfect upgrade to your basic AR15 into a premium weapon system. BKF Mod-1 Enhanced Combat Control Kit:

This Combat Control Kit is made from billet 4140 heat treated alloy steel with a beautiful nitride finish. The textured surface gives it an enhanced gripping ability. The ambidextrous safety selector can be used as a 90° or 45° throw lever. The mag release is deeply threaded to allow for normal height installation, or thread it halfway to get an extended mag release! The oversized bolt catch makes those mag reloads much easier and quicker. A must have for every build!

• 1x CAS – Combat Ambi Selector 45/90
• 1x CBC – Combat Bolt Catch
• 1x CMR – Combat Mag Release
• Made in America

Breek Arms WARHAMMER Mod2 AR-15 Ambidextrous Charging Handle:

The Breek Arms WARHAMMER MOD2 ambi charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The wide set-back latches work great for large optics. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability!
The new MOD2 design features improvements for further reducing gas blowback in the shooter’s face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed!

• Material: 7075-T6 aluminum
• Fits all mil spec AR15/M16 Rifles
• Finish: Type III hard-coat anodized
• Perfect replacement for any factory charging handle
• Latches are also 7075-T6 aluminum
• Oversize ambidextrous release levers on both sides, 2.78″ total width across the handles
• Set-Back Latches work great for large optics
• Allows for one handed manipulation
• Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses
• Weighs in just under 1 ounce!
• No gun smith required
• Made in America

BKF M4 MOD-1 5.56/223 Comp:

NEW FROM BKF! Designed from the ground up in a collaborative effort with some of the most up and coming names in the industry, the all new “M4 MK1 Comp ”. This beautifully nitride coated muzzle device sports a slim profile, providing significant weight savings compared to its competition. The porting was designed specifically to greatly reduce felt recoil and muzzle rise, allowing for faster follow up shots on target. These features, coupled with very competitive pricing, make for one of the best bang-for-your-buck muzzle devices on the market.

• Precision turned from high tensile strength 4140 chromoly steel
• Extremely high temperature resistance to handle full-automatic fire
• Slim, unobtrusive profile
• Durable high hardness nitriding process, yielding hardnesses up to 54 HRC
• Top gas ports practically eliminate rise
• Hybrid muzzle attachment, eliminate both muzzle climb and recoil
• Virtually zero gas blow back due to 3 port flat face design
• Proudly made in the USA
• Machined in one operation, no error is introduced from repositioning in multiple setups
• Nitrided by H&M increasing the 4140 CMV hardness
• Weight is 2.295oz
• Threaded 1/2×28
• ID .250″
• Length 2.25″
• Includes Crush Washer
• Made in America

Two Stage Phosphate Complete Fire Control Group (Schmid Tool)

2-Stage Trigger with a Flat Non-reflective finish. The two stages of this trigger consist of an initial 2lb pull that brings you to a “wall”, where the hammer and trigger are set to break for the shot. After that its only 2.5 lb pull to fire, helping to make accurate shots with short resets in between.

• Trigger –  8620 Phosphate Coated
• Hammer – 8620 Phosphate Coated
• Disconnect
• Hammer Spring
• Trigger Spring
• Disconnect Spring
• Hammer/Trigger Pins (2)
• 100% USA Made by Schmid Tool

PRODUCT SKU: BKF-PK-BREEK-1/2×28-2SFCGC-P