Sale!

New Frontier Armory C-9 (Glock) Billet Receiver Set W/ 7.25″ Parallax Tactical Rail – Tungsten Cerakote

$319.99

Out of stock

Email when stock is available



Description

C-9 Stripped Billet Lower Receiver — Glock Style Mags Description:

Manufacturer: New Frontier Armory

Model: C-9

Type: AR-9 Stripped Lower Receiver — milled from 7075 T6 aircraft grade aluminum billets

Caliber: Multi (will accept any 9mm, .40 S&W, .357 SIG,  and other small frame caliber upper receiver)

Magazine: Accepts any Glock style small frame pistol caliber magazines in 9mm, .40 S&W, .357 SIG,  and other calibers

Weight: 12.9 oz

Other Specifications and Features of the C-9 Stripped AR-9 Lower Receiver:

  • Machined from 7075-T6 aircraft grade billet aluminum
  • Matte black hard-coat anodized per Mil 8625 Type 3 Class 2
  • Precision machined magazine well with beveled feed lip for easy mag swaps
  • Machined and engraved to be compatible with 45 and 60 degree short throw fire control selectors such as the BAD_ASS ST 45 Lever
  • Caliber marking of “Multi” so it can be used with different pistol caliber uppers
  • Compatible with most standard AR-15 components  and most aftermarket parts
  • Take down pin spring and detent hole is threaded for a 6-32 set screw for easy capturing (hardware included)
  • Upper tension screw behind grip screw (threaded hole with hardware included) to adjust any “slop” out of vertical fit between upper and lower
  • Ambidextrous trigger finger rests with grooves (above and below mag release / mag catch)
  • Threaded bolt catch pin (Threaded hole and hardware)
  • Integrated large opening “winter” trigger guard
  • Proprietary magazine catch assembly and ejector is included and installed at the factory
  • Manufactured to MILSPEC (where applicable) on state of the art CNC equipment for consistent quality parts and exacting tolerances
  • Save money by building your own AR-9 rifle from the ground up exactly the way you want it configured and shoot for less!

**NOTE – Please read the FAQ below regarding adjustment of your ejector before use and ensure you re-assemble with Loctite or similar threadlocker to prevent screws from backing out over time.

Pistol Upper Description:

Pistol Caliber Billet AR-9/45 “Slick Side” Upper with LRBHO (Last Round Bolt Hold Open)

 Manufacturer: New Frontier Armory

Model: Pistol Caliber Billet AR-9/45 “Slick Side” Upper with LRBHO — PATENT PENDING

Caliber: Multi (will accept any barrels, bolts and caliber designed for the AR-9/45 style platform)

Weight: 8.96 oz

Measurements:  7.662″ x 1.375″ x 2.314″

 Other Specifications and Features of the Billet AR-9/45 “Slick Side” Upper with LRBHO:

  • Machined from 7075 T6 aircraft grade billet aluminum
  • Matte black hard-coat anodized per Mil 8625 Type 3 Class 2
  • Compatible with all standard AR-15 / AR-9 components and most aftermarket parts
  • Manufactured to MILSPEC on state of the art CNC equipment for consistent quality parts and exacting tolerances
  • Save money by building your own AR-9 rifle or pistol from the ground up exactly the way you want it configured
  • Designed to match lines with New Frontier Armory C-9  & C-45 Billet Lower
  • Contains integrated Last Round Bolt Hold Open (LRBHO) technology (PATENT PENDING) that reliably holds the bolt open when magazine is empty
  • LRBHO feature is designed for lowers that accept Glock style magazines
  • **NOTE — This upper is not machined for a gas tube as it is intended for blowback gas systems only

 

Once assembled the small “hook” end of the wire form in the upper should be pushed up by the follower of an empty Glock magazine which will engage the bolt catch on the last round fired to hold the bolt in the locked position.  If it does not engage, or engages before the last round is fired you can make VERY SMALL adjustments by SLIGHTLY bending the “hook” end down to lock faster or up to lock slower.  They are set and function checked during assembly with brand new Glock magazines and our standard bolt catches.  Because of varying magazine specs, magazine specs changing over the life of the product, different thicknesses of the pad on the bolt catch and other variables, this adjustment may be necessary with your specific parts.

**NOTE:  Some rail systems that use anti-rotation tabs may need slight modification to fit this upper.  It is designed for flush mounting rails and standard hand guards.

The New Frontier Armory Pistol Caliber Billet AR-9/45 “Slick Side” Upper with LRBHO is proudly MADE IN THE USA by hard working American men and women.

AR15 Parallax Tactical 7.25″ M-LOK Gen 3 Super Slim Handguard

Description:

The PXTreme M-LOK by Parallax Tactical is a free floating, extremely durable, drop in rail for your rifle.  Utilizing the brand new Magpul M-LOK standard with strict adherence to Magpul’s technical specifications, this rail system is guaranteed to work with officially licensed M-LOK acessories.

The Lightweight FFSSR series rail is strictly a minimalist rail, having removed the QD cups and extra bulk from other versions of the FFSSR.  We weighed the LW vs. the standard M-LOK rails and found the LW versions 2.4 oz lighter.

The FFSSR is made to be durable, simple, and extremely easy to machine.  This durable free floating rail is one of the most affordable on the market as a result.

  • Made from Aluminum
  • Finished in Type III HardCoat Anodizing
  • Steel Barrel Nut finished in Black Nitride for corrosion resistance
  • Grade 8 Fasteners
  • Timing shims included
  • 1.30″ internal diameter
  • 1.60″ outside diameter
  • M-LOK slots at the 3, 6, and 9 o’clock sides
  • 5oz
  • Barrel Nut uses a 1 1/4″ crowfoot Wrench(not included)

Includes:

  • Parallax Tactical 7.25″  Gen 3 Super Slim M-LOK Handguard with barrel nut, shims and mounting hardware.

Additional information

Weight 3 lbs
Dimensions 10 × 8 × 6 in